What is Market Profile? Market Profile is a charting method developed by CBOT trader Peter Steidlmayer that organises a day’s trading by price instead of by time, so you can see where the market accepted value (the value area and point of control) and where it rejected prices. Reading a Market Profile chart means reading those structures: the TPO letters, the initial balance, the POC, the value area and single prints, and working out whether buyers or sellers were in control.
- A Market Profile chart plots a letter (TPO) at every price traded in each 30 minute period, so wide rows show where the market spent time.
- The point of control (POC) is the price with the most TPOs; the value area holds roughly 70% of the day’s TPOs.
- The initial balance is the first hour (periods A and B); range extension beyond it shows other timeframe participation.
- Single prints and low value nodes mark fast, one-sided moves; high value nodes mark acceptance and act as support or resistance.
- Market Profile is a decision support tool. Use it with your own trading system, not as a system on its own.
Who should start reading a Market Profile chart?
Market Profile is not a trading system but a market generated information and a decision support system along with your existing trading systems. It provides you knowledge about who is in control in the market (Long Term Players, Short Term Players, Day Traders), directional conviction. Market Profile gives an idea to a day trader about where to take a trade and which tend to play for the day based on trend conviction.
Nifty Futures – Day Profile

Market Profile study is different from traditional technical analysis indicators. You need to unlearn lots of your so-called traditional technical analysis learnings before diving deeper into it. Like any other technical analysis studies, Market Profile consumes lots of time in learning. It requires at-least a live observation for 3 months and parallel reading is needed to understand what other market players are trying to do and how the pro traders and institutional players are driving the market. As a human trader, it often happens that we tend to see what we want to see and react based on limited information. Market Profile solves this perceptual blindness to some extent.
Market Profile talks about how auction takes place in the market. Financial Market is all about two-way auction process where buyers and sellers both drive the price up and down. The byproduct of the two-way auction process is market-generated information. By reading the market-generated information one can learn who is in control in the market (Buyers or Sellers) and how much confidence they are in driving the prices higher or lower. It also helps a day trader to stay away from the retail style crowd play most of the time.
How to Read a Market Profile Chart
Market Profile was developed by legendary CBOT trader Pete Steidlmayer in 1984. It shows where the auction of the trading instrument, explains where the crowd trades most of the time for the day, where trading volume is accumulated most of the time, where trading volume is minimal or absent.
Market Profile is not a time-based chart rather it organized the trading data and charts the relative frequency of trading at various price levels. By organizing the trading data in terms of profiles (Alphabets) one can study the market structure and market dynamics. Typically Day profile is meant for Day traders where each and every day a free-flowing graphical format called profiles are plotted as shown above.
Readings: How to Get Market Profile and Footprint Profile Charts?
Basic Market Profile Terminologies
TPO (Time Price Opportunity)
TPO – TPO or Time Price Opportunity is the basic building block of Market Profile. Each and every letter in the chart represents a TPO. Which in turn represents a point of time where the market touches a price. Each consecutive letter denotes a 30min period of Market Activity. In our example, as shown below the letter ‘A’ represents how the price traded for the first 30min. Letter ‘B’ represents the next 30min of activity. And Letter ‘C’ and ‘D’ represents subsequent market activity details and so on.
On NSE the cash and F&O session runs from 9:15 am to 3:30 pm, so with 30 minute periods letter A covers 9:15 to 9:45, B covers 9:45 to 10:15, and the day ends with a short last period (3:15 to 3:30) as letter M. Some software lets you change the period length; 30 minutes remains the standard.

TPO Size
TPO Size: Practically speaking we need to define the size of TPO to make sure that your entire profile is visible. Generally one can try in Nifty Futures with TPO Size of 3 which mean each and every letter represents a block of 3 points in Nifty Futures. And TPO Size should depend upon the Trading Instrument. For greater accuracy of Key reference levels, it is advisable to use TPO size as less as possible but with higher TPO Size more historical data can be seen and key reference levels out of range can be seen with higher TPO Size.
Generally TPO Size = Tick Size x Price Per Row
For example, if TPO Size = 80 and Tick Size is 0.05 then the TPO Size is 4 points. By default Ninjatrader uses tick size of 0.01 and can be changed depends upon the Symbols tick size. Settings in Ninjatrader are shown below
Note that Nifty has moved from the 8,000s in 2015 to well above 20,000 today, so a 3 point TPO size that worked when this article was first written will now produce a very tall profile. Scale the TPO size roughly with the index level and the day’s range: the goal is a profile of about 20 to 40 rows that still fits on one screen.

Initial Balance (IB)
Initial Balance (IB) : Initial Balance represents the first hour of trade. Typically the high and low range of the letters ‘A’ & ‘B’. Longer the length of the Initial Balance stronger the conviction of Long term and Short term players.

Point of Control (POC)
Point of Control : Point of control is the price where most of the trade for the day happens. In other words the price where more number of TPO’s in a row. Todays ongoing POC levels are represented as DPOC (Developing POC) and Yesterdays POC (YPOC) and Previous POC levels are plotted as dotted green lines as shown above.
Value Area, VAH and VAL
Value Area : Value Area is the fair price zone where the Other Timeframe Players (Long Term players and Shorter Term Players) loves to trade in this zone. 70% of the day’s trading happens here.
Value Area High (VAH): The upper level of value area. (upper Red Bracket Level). YVAH – Yesterday’s value area high is marked as Red Dotted Line.
Value Area Low (VAL): The lower level of value area. (Lower Red Bracket Level). YVAL – Yesterday’s value area low is marked as Blue Dotted Line.
The 70% figure comes from the idea of one standard deviation around the mean of a normal distribution (about 68%). Software builds the value area outward from the POC, adding rows two at a time on whichever side has more TPOs, until 70% of all TPOs are inside. You can try the exact procedure in the calculator below.
Paste the TPO count for each price row of a day profile and see the point of control, value area high and value area low worked out the way most Market Profile software does it.
Method: start at the row with the most TPOs (POC), compare the two rows above with the two rows below, add the larger pair, and repeat until the chosen share of all TPOs is covered. When two rows tie for the most TPOs, the one closest to the middle of the day’s range is used as POC.
Single Prints, Range and Open Range
Single Prints : When there is only one TPO in a Row. From the above picture you can identify that Letter ‘D’ and ‘L’ are single prints.
Range : High-Low range for the day
Open Range : First 10 minutes of the market movement range. It is represented as the Blue Vertical lines in the Initial Balance (IB)
Range Extension: An extension of price above or below the initial balance.
High Value Node (HVN) and Low Value Node (LVN)
High Value Node (HVN) : An HVN is a price area of high TPO count or volume. The market traded for a long time at this level. These often form support or resistance levels when the price re-visits the area.
Low Value Node (LVN) : An LVN is a price area of low TPO count or volume. The market did not trade for very long time at this level. These often form support or resistance levels when the price re-visits the area.
Step by step: reading today’s profile
Once you know the terms, reading a profile comes down to a short routine. This is the order I follow before and during the session:
- Mark yesterday’s references. Plot YPOC, YVAH and YVAL, plus any single prints and poor highs or lows left behind.
- Watch the open against yesterday’s value. An open inside yesterday’s value area suggests balance; an open outside value (especially outside the range) suggests imbalance and possible trend.
- Measure the initial balance. A narrow IB leaves room for range extension later in the day; a wide IB usually means other timeframe participants have already acted.
- Track range extension. Extension above the IB with rising POC means buyers are in control; extension below with a falling POC means sellers are.
- Read the shape at the end of the day. A symmetric “D” shape is balance, a “P” shape points to short covering or buying, a “b” shape to long liquidation, and a thin elongated profile to a trend day.
- Compare value with yesterday. Higher value (today’s value area above yesterday’s) confirms buyers; overlapping value says the market is still balancing.
For the full list of day types and how they play out, read Market Profile: Different Types of Profile Days, and for the logic of value see Understanding Price vs Value.
Common mistakes when reading Market Profile
- Treating POC or VAH/VAL as automatic buy and sell lines. They are reference levels. What matters is how price behaves when it returns to them: acceptance (time spent) or rejection (quick move away).
- Using the same TPO size for every instrument. A setting that suits Nifty futures will be wrong for Bank Nifty, a stock future or crude oil.
- Reading a developing profile as if it were complete. The value area and shape change through the day; judge structure after the IB and again after the midday periods.
- Ignoring the larger timeframe. A bullish day profile inside a multi-day balance area is less meaningful than one breaking out of it.
- Skipping the observation phase. As mentioned above, three months of live observation teaches more than any rule list.
Rules such as the 80 percent rule build directly on the value area concepts covered here.
Frequently Asked Questions
What is Market Profile in trading?
Market Profile is a way of displaying price and time together. Each letter on the chart is a TPO, meaning price traded at that level during a particular 30 minute period. Stacking those letters shows the distribution of trade for the day, so you can see fair value (the value area and POC) and the prices the market rejected.
What is Market Profile used for in intraday trading?
Intraday traders use it to locate references (yesterday’s POC, value area edges, single prints), to judge whether the day is balancing or trending after the initial balance, and to place trades at the edges of value with stops beyond them, instead of chasing moves in the middle of the range.
What is the difference between Market Profile and Volume Profile?
Market Profile counts time: how many 30 minute periods traded at each price. Volume Profile counts the actual contracts or shares traded at each price. They often agree, but when they differ (for example, heavy volume at a price visited only briefly) volume profile shows where real size changed hands.
What is TPO in Market Profile?
TPO stands for Time Price Opportunity. It is one letter on the chart and represents one 30 minute period in which price traded at that row. The row with the most TPOs is the point of control.
Can I get Market Profile charts for Nifty?
Yes. NinjaTrader, Sierra Chart, MotiveWave and several Indian web platforms provide TPO charts for Nifty and Bank Nifty futures. See our guide on how to get Market Profile and footprint charts linked above for the options.
What to read next
In the next section we will discuss more about types of markets, market participants and different profile patterns.
Learn by watching: free videos every week
Market Profile, order flow, Python, AI and OpenAlgo tutorials on YouTube.


Fantastic explaination rajndran. Made it easy by you.
Thanks Rajandran! This is helpful
Very useful to people who are interested in Market Profile like me. We expect more from you. Thanks.
awesome
i have gone through your mail spike and spike rules.
as a common trader i find it very difficult to understand and analyse.
give us very simple instruction.
Just by reading the rules you cannot understand anything. Just experience it practically. Foremost start reading with Market Profile and get comfortable with the basics!
Hi Rajendran,
Will Market Profile be covered in the Sep ’15 Workshop ? Thanks.
Planning to allocate 2 hours post in the evening. Need to check with interested participants.
can you will provide with illustration for aove
Sir,
Where i can see these charts live real time ?
here http://www.marketcalls.in/market-profile
Hi Rajendran
Thanks for great post.I am trying to load the MP chart for my Multicharts version 9 trading platform ,found the indicator from below location which you have mentioned.
http://www.multicharts.com/discussion/viewtopic.php?f=5&t=10872
But I am not able to get proper MP chart.Could you please help me to make proper settings to draw properly?
Hi,
I need stock and nifty POC calculator. Please check and advise
Regards
Lakshminarayana G
Dear Rajan
Fantastic information……please keep on update……….
Simply the best!
HI! very good! Where Can I find this indicator of ninjatrader? Thanks!
Hi,
Could you please suggest any good books to understand in detail about Market Profile trading.
Thanks,
Rahul
Follow the below mentioned Books
1)Markets in Profile (Jim Dalton)
2)Mind over Markets (Jim Dalton)
3)cbot market profile handbook
could you suggest best software for creating MF chart
try with Ninjatrader + belltpo.com (Marketprofile indicator)
thanks for ur prompt reply .kindly clarify both works together or independent
both works together.
I am trying to learn and understand trading investing swing trading positional trading etc. Could you please guide as to how to continue. I am ready and understood the basics of all. Indicators, Candle Sticks, Etc.
Indicators dont help much as they are mostly lagging. I have so many doubts. Also what institutes should I start training (Are they of any help)
I did not understand this “TPO Size = Tick Size x Price Per Row” part at all. Can you please elaborate with the examples of Nifty and Bank Nifty index.
Hi Rajendranji.
What should one take as a IB period if looking at a monthly, weekly and daily profiles respectively.
Thanks,
Amrish
please suggest volality market tpo tick size for nifty
thank you sir